Infocus X6 Guide de l'utilisateur télécharger pdf (Page 35)

English ...

Appendices

Warning: To avoid

burns,allowtheprojec-

tor to cool for at least

60minutesbeforeyou

replace the lamp!

Warning: To reduce the

riskofpersonalinjury,

do not drop the lamp

module or touch the

lamp bulb. The bulb

may shatter and cause

injury if it is dropped.

Lamp Replacing Procedure:

1. Switch off the power to the projector by pressing the Power/

Standby .

 2. Allowtheprojectortocooldownatleast60minutes.

3. Disconnect the power cord.

4. Use a screwdriver to remove the screw from the cover. 

 5. Push up and remove the cover.

 6. Removethe2screwsfromthelampmodule and pull up

the lamp bar. 

 7. Pulloutthelampmodulebyforce.

To replace the lamp module, reverse the previous steps.

1 2 ... 30 31 32 33 34 35 36 37

Pas de commentaire

Infocus X6 Guide de l'utilisateur Page 35