Infocus X6 Guide de l'utilisateur télécharger pdf (Page 29)

English ...

Appendices

Problem: No image appears on screen



Ensure all the cables and power connections are correctly and

securely connected as described in the “Operation” section.



Ensure the pins of connectors are not crooked or broken.



Check if the projection lamp has been securely installed. Please

refer to the “Replacing the lamp” section.



Make sure you have removed the lens cap and the projector is

switched on.

Problem: Partial, scrolling or incorrectly displayed image



Press “Re-Sync” on the remote control.



If you are using a PC:

ForWindows3.x:

 1. IntheWindowsProgramManager,doubleclickthe“Windows

Setup” icon in the Main group.

2. Verify that your display resolution setting is less than or equal

to1280x1024.

ForWindows95,98,2000,XP:

 1. Fromthe“MyComputer”icon,openthe“ControlPanel”folder,

and double click the “Display” icon.

2. Select the “Settings” tab

3. Click on the “Advanced Properties” .

If the projector is still not projecting the whole image, you will

also need to change the monitor display you are using. Refer to

the following steps.

Troubleshooting

If you experience trouble with the projector, refer to the fol-

lowing information. If the problem persists, please contact

your local dealer or service center.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36 37

Pas de commentaire

Infocus X6 Guide de l'utilisateur Page 29