Infocus IN2112 Manuel d'utilisateur télécharger pdf (Page 12)

Adjusting the image

If necessary, adjust the height of the projector by pressing the elevator foot release

button to extend the foot.

Rotate the elevator feet for granular adju

stment of

the projector’s height. Avoid

placing your hands near the hot exhaust vent at the side of the projector.

Avoid placing your hands near the hot exhaust vent

at the side of the projector.

Position the projector to the desired distance from the screen at a 90 degree angle to

e screen. See page 6 for a table listing to screen sizes and distances.

Adjust the zoom or focus.

If the image is not square, first make sure that

the projector is perpendicular to the

screen. To reduce the size of the top edge of the image, press the top Keystone

button. To reduce the size of the bottom edge of the image, press the bottom

Keystone button.

If the left or right side of the screen is lar

ger

or smaller than the other, you can turn

the projector to the left or to the right a few degrees to square the image. See page 6

for details.

Adjust the Contrast or Brightness in the

Basic Picture menu. See page 27 for help

with these menu adjustments.

Adjust height

Adjust distance

Adjust zoom and focus

Adjust keystone

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 44 45

Pas de commentaire

Infocus IN2112 Manuel d'utilisateur Page 12