Infocus IN100 Manuel d'utilisateur télécharger pdf (Page 49)

Maintenance 49

13. Restart the projector.

CAUTION

Do not turn the power on with the lamp cover removed.

Resetting the lamp timer

14. After the startup logo, open the On-

Screen Display (OSD) menu. Go to the

SYSTEM SETUP: Advanced > Lamp

Settings menu. Press MODE/ENTER.

The Lamp Settings page displays.

Press to highlight Reset lamp timer

and press MODE/ENTER. A warning message displays asking if you want to

reset the lamp timer. Highlight Reset and press MODE/ENTER. The lamp

time will be reset to '0'.

CAUTION

Do not reset if the lamp is not new or replaced as this could cause damage.

9. Tighten the screw that secures the

lamp.

CAUTION

• Loose screw may cause a bad connection,

which could result in malfunction.

• Do not over tighten the screw.

10. Ensure the handle is fully laid flat

and locked in place.

11. Replace the lamp cover on the

projector.

12. Tighten the screws that secure the

lamp cover.

CAUTION

• Loose screw may cause a bad connection,

which could result in malfunction.

• Do not over tighten the screws.

Reset Lamp Timer?

Reset

Cancel

Notice

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 55

Pas de commentaire

Infocus IN100 Manuel d'utilisateur Page 49